









Neptune 3
Shipping calculated at checkout.
- Print Volume 220 x 220 x 280 mm³
- RSG Leveling System
- PEI Magnetic Platform
- Silent Stepper Driver
- Powerful Extruder
- Removable 4.3'' Touch Screen
Product information
Where We Ship
Orders placed on ELEGOO US (us.elegoo.com) can be shipped to the United States.
1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.
Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.
Shipping Restrictions
- Your order can be delivered to any of the 48 contiguous U.S. states or Washington, D.C. However, we currently do not ship to Alaska, Hawaii, U.S. territories (American Samoa, Guam, Northern Mariana Islands, Puerto Rico, and the U.S. Virgin Islands), or Freely Associated States (Federated States of Micronesia, Marshall Islands, and Palau).
- Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees:
Ownership, Terms, and Risk
1. Please ensure your shipping address is accurate. Once the package is dispatched, we cannot reroute it. You are solely responsible for verifying the address. If a loss occurs due to an incorrect address or a fraudulent transaction, you will be liable for all financial losses.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any courier services.
2. Orders (excluding Pre-Orders) are typically forwarded to the warehouse 8 hours after placement. Once submitted to the warehouse, orders are generally non-cancellable and non-modifiable. If modifications are required, we will attempt to coordinate with the warehouse; however, success cannot be guaranteed. Costs incurred due to address errors or cancellations are subject to our Return & Refund Policy, and you will be responsible for payment.
3. Please ensure all order details are accurate and your phone is accessible. If a product is returned due to the following reasons, we reserve the right to charge return shipping fees and redelivery costs prior to resending the item:
A. Failure to contact the delivery carrier within 5 days of a delivery attempt.
B. Incorrect shipping address provided.
FAQ
Q: If I order multiple products, will they be delivered together?
A: We aim to ship items together whenever possible. However, depending on product availability or shipping requirements, items may arrive separately. You will receive a notification email for each shipment.
Refund Policy & Warranty Info
Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.
Warranty Policy
1. Warranty timeline
2. Warranty Period
All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.
3. Warranty Forfeiture
The following Conditions Are Not Covered Under Warranty:
A. Product is not from ELEGOO or distributors authorized by ELEGOO
B. Products without purchase receipt or any other sufficient proofs of purchase
C. Lost or stolen products
D. Items that have expired their warranty period
E. Non-quality-related issues (after 30 days of purchase)
F. Free products
G. Repaired by a third party or modified by an individual
H. Damage from outside sources
I. Damage from misuse of products (including, but not limited to: resin leakage, falls, and operating devices improperly)
J. Normal discoloration, wear, or consumption during product use
K. The LCD screen cannot provide an SN code
Return & Refund Policy
1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.
Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.
If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we refer to such a product as an "unwanted product".
A. For unopened products (with all original tags and labels attached), you can return them within 14 days of delivery for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.
B. For open-box and unused products, within 14 days of delivery, you can return them for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 15% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.
C. For used products or orders beyond 14 days, refunds for unwanted products are not available.
Important:
1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.
2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.
3. The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo's sole discretion.
2. For Quality-Related Items
*This clause does not apply to Pre-owned & Refurbished items.
Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.
A. Product is defective when you receive it, within 14 days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.
B. Beyond the 14 days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.
C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.
Important:
1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.
2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.
3. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).
3. Process After Returning Product
After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.
Contact Us
Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.
- For 3D printer technical support: 3dp@elegoo.com
- For laser engraver technical support: lec@elegoo.com
- For order issues, unwanted item refunds, or returns: info@elegoo.com
- For STEM kits, robots technical support: service@elegoo.com
When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

RSG Leveling System
RSG Leveling System

PEI Magnetic
Platform
PEI Magnetic
Platform

Ultra-Quiet Printing
Ultra-Quiet Printing

Reliable Extrusion System
Reliable Extrusion System

Smart Resume Printing
Smart Resume Printing

Removable
Touchscreen
Removable
Touchscreen

RSG Leveling System
RSG Leveling System

PEI Magnetic
Platform
PEI Magnetic
Platform

Ultra-Quiet Printing
Ultra-Quiet Printing

Reliable Extrusion System
Reliable Extrusion System

Smart Resume Printing
Smart Resume Printing

Removable
Touchscreen
Removable
Touchscreen
Auto Leveling
Precise 16-point RSG leveling system adopts a strain gauge pressure sensor on the print head to measure the height between the nozzle and the printing platform at 16 points.
With just one touch, it will automatically calibrate and compensate for any slight variations and unevenness between the heated bed and the print head, ensuring a consistent distance between the nozzle and heated bed and a perfect first layer printing.

Double-gear Extruder
The double-gear metal extruder adopts a spring elasticity adjustment device and special titanium alloy throat pipe for more uniform extrusion force, and continuous & stable filament feeding.

PEI Magnetic Platform
PEI magnetic platform with a spring steel sheet and good adhesion and printed models can easily be removed by bending the print sheet.

Smart Resume Printing
No worry about unexpected power off as the printer can recover from the power outage and continue printing.
With a filament sensor, whenever there are possible accidents like filament runout, filament breakage, or filament blockage, the machine will stop work for resuming printing before the new filament feeds in.
Neptune 3 also comes with a guide wheel structure to reduce the feeding resistance of consumables and noise generation.


Solid metal frame with a portable handle and overhead gantry for maximum stability during printing for better overall print quality.
V-guide roller made of POM with smooth movement, low noise, and wear resistance.
The XY axis adopts the belt tension adjustment device with a hand-tightening nut to conveniently and easily adjust the belt tightness.

The 250W hotbed can quickly heat up to 100ºC to meet the needs of different filament materials and avoid warping issues.
The branded power supply has been repeatedly verified to ensure safe printing and reduce printing errors.
The XYZ axis is driven by TMC2225, E0 axis is driven by TMC2209 with more stable motion performance and a lower printing noise of under 50db, like a person's whisper.

The larger build volume of 220x220x280mm gives you more freedom to produce larger models or carry out batch printing.
A removable 4.3-inch color touchscreen with a multilingual intuitive interface and smooth touch controls by hand or fixed on the base, giving you a user-friendly operating experience.
Double-sided cooling fans with a more reasonable nozzle heat dissipation structure, which automatically shuts down after the nozzle is lower than 50 degrees, reduce fan noise, and prolong the service life of the fan.
What's In Box

Neptune 3 3D Printer

Base Unit

Gantry Frame Unit

Power Supply

Touch Screen

Spiral Cable

Spool Holder

Spool Holder Arm

Power Cable

Handle

Fasteners

Tools

User Manual
Specification
Product Model
Neptune 3
Printing Technology
FDM (Fused Deposition Modeling)
Frame Material
CNC machined aluminium extrusion
Voltage
100-120V/220-240V
File Transfer Method
TF card, USB cable
File Format
STL、OBJ
UI Language
English, French, German, Russian, Italian, Spanish, Japanese, Chinese
Build Volume
220 x 220 x 280 mm³
Printing Platform Size (PEI Area)
230 x 230 mm²
Machine Size
442 x 452 x 530 mm³
Package Size
605 x 490 x 240 mm³
MAXIMUM SIZE FOR MACHINE ACTIVITY/MM
450 x 550 x 750 (Including Rack & Tray)
Net Weight
8.1 kg
Gross Weight
10.35 kg
Max. Nozzle Temperature
260 °C
Max. Hot bed Temperature
100 °C
Resume Printing
Yes
Filament Detection
Yes
Filament Compatibility
PLA / PETG / ABS / ASA
























FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 business days for delivery
2. Pre-owned Product: 4-8 business days for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 business days for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
Click to view Shipping Fees
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.