







PRE-ORDER
OrangeStorm Giga
$2,499.99 USD
/
Shipping calculated at checkout.
Pre-order Shipping Notice:
- Gigantic Build Volume: 800mm x 800mm x 1000mm
- Efficient Heated Bed
- Fast Printing
- Support Multi-Nozzle Printing
- Powerful Cooling Fan
Product information
Where We Ship
Orders placed on ELEGOO US (us.elegoo.com) can be shipped to the United States.
Shipping Route |
Product Type |
Estimated Delivery Time |
Domestic (US to US) |
In-Stock |
3-7 business days |
Pre-Owned |
4-10 business days |
|
Pre-Order |
Pre-orders will ship by the estimated date listed on the product page, with delivery within 3-7 business days after dispatch. |
1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.
Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.
Shipping Restrictions
- Your order can be delivered to any of the 48 contiguous U.S. states or Washington, D.C. However, we currently do not ship to Alaska, Hawaii, U.S. territories (American Samoa, Guam, Northern Mariana Islands, Puerto Rico, and the U.S. Virgin Islands), or Freely Associated States (Federated States of Micronesia, Marshall Islands, and Palau).
- Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees:
Category |
Condition |
Shipping Fee |
Standard Shipping |
Orders of $50 or more |
Free |
Orders under $50 |
$15 flat rate |
|
Exceptions |
Saturn 4 Series (Saturn 4, Saturn 4 Ultra, Saturn 4 Ultra 16K) |
$20 per unit |
Centauri Series (Centauri, Centauri Carbon) |
$30 per unit |
Ownership, Terms, and Risk
1. Please ensure your shipping address is accurate. Once the package is dispatched, we cannot reroute it. You are solely responsible for verifying the address. If a loss occurs due to an incorrect address or a fraudulent transaction, you will be liable for all financial losses.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any courier services.
2. Orders (excluding Pre-Orders) are typically forwarded to the warehouse 8 hours after placement. Once submitted to the warehouse, orders are generally non-cancellable and non-modifiable. If modifications are required, we will attempt to coordinate with the warehouse; however, success cannot be guaranteed. Costs incurred due to address errors or cancellations are subject to our Return & Refund Policy, and you will be responsible for payment.
3. Please ensure all order details are accurate and your phone is accessible. If a product is returned due to the following reasons, we reserve the right to charge return shipping fees and redelivery costs prior to resending the item:
A. Failure to contact the delivery carrier within 5 days of a delivery attempt.
B. Incorrect shipping address provided.
FAQ
Q: If I order multiple products, will they be delivered together?
A: We aim to ship items together whenever possible. However, depending on product availability or shipping requirements, items may arrive separately. You will receive a notification email for each shipment.
Refund & Warranty
Thank you for your purchase. We hope you are satisfied with your product. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and conditions vary depending on the model and parts list.
Warranty Periods
Category | Models | Parts List | Note | Warranty Period |
All | / | / | Consumable parts with no warranty or limited warranty. | 12 Months |
3D Printing Machine & Parts | Neptune 3/3 Pro/3 Plus/3 Max Neptune 4/4 Pro/4 Plus/4 Max OrangeStorm Giga Centauri Carbon/Centauri |
PEI Platform Plate/PEI Platform Kit/PEI Magnetic Platform Kit/Build Plate/Nozzle (Kit)/PTFE Tube/Tools | Consumable parts with no warranty. | No Warranty |
Extruder/Extruder Kit/Printhead Kit | Consumable parts with limited warranty. | 6 Months | ||
Mars/Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra Saturn S/2/8K/3/3 Ultra/4/4 Ultra/4 Ultra 16K Jupiter/Jupiter SE |
Release Film, Tools | Consumable parts with no warranty. | No Warranty | |
LCD Screen | Consumable parts with limited warranty. Resin leakage, scratch-resistant film damage, human-caused damage, and collision damage are not covered by the warranty. | 3 Months | ||
Resin Tank/Build Plate | Consumable parts with limited warranty. | 6 Months | ||
Mercury Mercury Plus V1.0/V2.0/V3.0 Mercury X/XS Bundle |
Washing Bucket, Curing Turntable, Acrylic Cover | Consumable parts with no warranty. | No Warranty | |
Phecda Laser Engraver & Cutter - 10 W/20 W |
Consumables and Other Attached |
Window Mirror, Power Cord, USB Cable, Engraving Materials, User Manual, Packaging, Tools | Consumable parts with no warranty. | No Warranty |
Other Parts① | Synchronous Belt, Motor Cable, Laser Cable | Consumable parts with limited warranty. | 3 Months | |
Other Parts② | Fans | Consumable parts with limited warranty. | 6 Months |
1. Consumable Parts
Consumable parts are either excluded from warranty coverage or covered under a limited warranty period. For the purpose of this policy, "consumables" are defined as disposable items, components, or parts of the Product that are inherently designed to deteriorate or wear out during normal use of the Product.
While these items may not be covered by the standard warranty or may have a limited warranty period as specified in the table above, we will gladly replace any consumable that fails due to a manufacturing defect, provided the printer itself is still under warranty. ELEGOO reserves the exclusive right to determine eligibility for replacement, and such decisions shall be final.
2. Accessories or Parts Purchased Separately
Accessories or parts purchased separately enjoy the same quality assurance policy as the complete machine.
3. Warranty Periods
All periods stated on this page are calculated from the date the original order was received.
4. Warranty Forfeiture
This warranty does not cover the following cases:
A. Products not purchased from ELEGOO or authorized ELEGOO distributors with a valid receipt or invoice.
B. Products that are lost or stolen.
C. Products whose warranty period has expired.
D. Free products or products that have been refunded.
E. Products repaired by a third party or modified by an individual.
F. Damage caused by external factors or misuse of products (including but not limited to resin leakage, falls, improper operation), normal discoloration, wear and tear, or other non-quality-related issues.
G. LCD screens that can not provide an identifiable SN code.
5. Warranty in Other Regions
For consumers protected by local consumer laws in their country of purchase, ELEGOO's Limited Warranty benefits are provided in addition to all rights and remedies under such laws, including but not limited to those described above. If local regulations specify a warranty period longer than our stated policy, the longer period will apply, and we will fully comply with local requirements to support our customers.
Return & Refund Policy
Non-Quality-Related Issues | |||||
Product Status | Items | Responsibility for Both Original Shipping Charges and Return Shipping Charges | Restocking Fee | Deduction Fee | |
Refund | |||||
Within 14 Days | Unopened | √ | Customer | 5% based on the order amount | If key parts are found missing on the returned machine, the corresponding fees will be deducted. |
Open-box and unused | √ | Customer | 15% based on the order amount | ||
Used | × | × | × | ||
Within Warranty | All Status | × | × | × | × |
Quality-Related Issues | |||||
Items | Responsibility for Fees | ||||
Refund | Replace | Repair | Return Shipping Charges | Repair Fees | |
Within 14 Days | √ | √ | √ | Elegoo | Elegoo |
Within Warranty | × | × | √ | × | Elegoo |
Out of Warranty | × | × | √ | × | Customer |
Important Notes:
1. These clauses do not apply to pre-owned or refurbished items.
2. All return requests must be approved by our official customer support team and be sent to our designated address as instructed. Unapproved returns may be rejected or lost, and we are not liable for such cases. Please confirm with customer support before returning to ensure safe processing.
3. The original item must be shipped within 7 days (return label is valid for 7 days) after return/replacement approval. Failure to do so will void the request, and later contact may require re-troubleshooting.
4. Please retain the original packaging to ensure your product is protected during transit. Deviating from our packaging instructions may void the warranty and incur additional charges. For warranty claims, the original box and packing materials are required to avoid processing delays.
5. The returned product will be thoroughly inspected by ELEGOO upon receipt to determine if it meets the inspection criteria. If the returned product fails to meet these criteria, your refund request may be rejected or subject to a deduction fee at ELEGOO's sole discretion.
6. Refunds or replacement products will be processed after we receive the returned item.

Gigantic in Size
Gigantic in Size

Fast Printing
Fast Printing

Auto-Leveling
Auto-Leveling

Upgraded Nozzle
Upgraded Nozzle

Efficient Heated Bed
Efficient Heated Bed

Multi-Nozzle
Printing
Multi-Nozzle
Printing
Gigantic in Size
With a build volume of 800mm x 800mm x 1000mm, the industrial-grade FDM printer not only meets the user's printing needs for oversized models, but also reduces the need to cut models into smaller sections for efficient printing.
*To better understand how large this printer is: Video or 3D Model Mockup of Giga.

Efficient Heated Bed
The heated bed consists of four independent (410*410mm) PEI magnetic high-temperature platforms with a maximum temperature of 100°C.
The four platforms can be heated simultaneously to reach 100°C over the entire area in 17 minutes (Ambient temperature: 25℃).
The platform where the model is located can also be automatically recognized and heated independently, or manually and independently controlled for increased energy efficiency.

Fast Printing
Utilizing a 64-bit 1.5G clock speed quad-core high-performance processor (SOC RK3328), it provides sufficient computing capacity while delivering 6 times the printing speed, with a maximum speed of 300mm/s (150mm/s recommended), which is the top end print speed for printers of its size.

Multi -Nozzle Printing
Three additional printheads can be added to the X-axis to realize simultaneous printing with four nozzles, supporting printing four of the same model, while each nozzle can be equipped with the same material and different color filament to achieve four different colored models of the same kind.
The maximum power requirement is 1,530 W. For each additional printhead, an extra 100 W is needed. Please ensure that your setup can accommodate this total power load.

Powerful Cooling Fan
Thickened double-sided cooling fans can comprehensively enhance the model printing results. In addition, the fans are equipped with an intelligent control function that stops working when printing is complete, which saves energy and reduces noise as well as prolongs the lifespan. (5015 ball blower fan*2, 4010 ball axial fan*1)

High-Quality Craftsmanship
Integrated body, elegant yet durable. The X-axis and Y-axis are linear guides, effectively improving printing stability and increasing lifespan. The Z-axis features an upgraded version of the Z-Axis rod to make the machine run smoothly and ensure leveling precision. Machine mounts are designed with a carbon steel round base and rubber round anti-slip pad bottom.

Powerful Extrusion System
OrangeStorm Giga features a high-quality brass nozzle capable of reaching 300 °C, ideal for high-temperature materials. The dual-gear direct extruder and titanium heat break ensure consistent filament flow, while the 60 W ceramic heater provides rapid and stable heating.
Equipped with advanced PID auto-calibration and a built-in acceleration sensor, OrangeStorm Giga ensures exceptional print quality by maintaining precise temperature control and reducing vibrations. Create stunning results for all your projects with ease.
Nozzle Diameter (included): 0.6 mm
Nozzle Diameter (optional): 0.4 mm/0.8 mm/1.0 mm


Adopting one-click automatic leveling and a non-contact high-precision sensor to automatically collect 100-point (10*10) of platform data to ensure the platform is level.

The cables on the body are stored in caterpillar cable tracks, which prevents the cables from being worn or broken and you don’t have to worry about them affecting your prints. Furthermore, it prevents dust and other debris from entering the cables, ensuring the stability and reliability of the entire system.

No more worrying about being interrupted while printing. When there is a broken filament or no filament, the machine automatically sounds an alarm and pauses printing. Whether it's broken filament, no filament, power outage, or a manual pause in printing, you can resume printing again.

The 10.1-inch HD capacitive screen can be detached from the body for handheld operation while supporting ELEGOO Cura model preview and switching between eight languages.

The X/Y axis belt is used to transmit the power of the motor and control the movement of the print head on the plane. The knobs design can easily and accurately control the tightness of the belt to obtain the best printing effect.

Crafted from high-quality sheet metal, our spool holder can accommodate filament spools up to 5kg with ease. Its compact and sturdy design ensures that your large-scale printing projects receive reliable and consistent support throughout the printing process.
What's In Box

OrangeStorm Giga 3D Printer

Printhead

Screen

Leveling Plate×2pcs

Spool Holder Arm

Spool Holder

Filament Breakage Detector×2pcs

Z-axis Caterpilar Cable Tracjs Clip

Z-axis End Stop×2pcs

Filament Guide Aseemby

Detached Spool Holder Assembly(5KG)

Power Cable

Leveling Card

Grease

Proofile Corner Bracket×8pcs

Tools

Fasteners

User Manual
Specification
Product Model
OrangeStorm Giga
Printing Technology
FDM (Fused Deposition Modeling)
Frame Material
CNC machined aluminium extrusion
Voltage
100-120 VAC/220-240 VAC, 50/60 Hz
1,530 W (single head; +100 W per additional head)
File Transfer Method
USB, LAN, WIFI
File Format
STL, OBJ
UI Language
English, French, German, Russian, Italian, Spanish, Japanese, Chinese
Build Volume
800 × 800 × 1000 mm
Printing Platform Size (PEI Area)
820 × 820 mm
(4 independent 410 × 410 mm PEI plates)
Machine Size
1,224 × 1,164 × 1,425 mm
Package Size
Bottom + XY Axis Components: 1,350 × 1,215 × 420 mm
Two Z-Axis Components: 1,350 × 1,215 × 350 mm
MAXIMUM SIZE FOR MACHINE ACTIVITY/MM
1,224 × 1,520 × 1,570
Max. Nozzle Temperature
300°C
Max. Hot bed Temperature
100°C (ambient temperature: 25°C)
Filament Compatibility
PLA / PETG / TPU
Net Weight
104 kg
Gross Weight
145 kg
Resume Printing
Yes
Filament Detection
Yes
Max Speed of Tool Head
300 mm/s
Max Acceleration of Tool Head
5,000 mm/s²
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 business days for delivery
2. Pre-owned Product: 4-8 business days for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 business days for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
Click to view Shipping Fees.
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.