Mercury Plus V3.0

Bought this in 2024. Worked great for about a year (same as warranty), but than the LEDs start to fade and fail. Just be aware they don't last long.

-Ben S.

This is my second purchase of the Elegoo Mercury Plus V3.0 cleaning station, and it has exceeded my expectations once again. It delivers outstanding cleaning performance every time, making resin print post-processing fast, easy, and mess-free. The compact design doesn't take up much space, yet it's powerful and incredibly efficient. It's also very simple to operate, making it perfect for both beginners and experienced resin printing enthusiasts. Elegoo has built another high-quality, reliable product, and I couldn't be happier with my purchase. I highly recommend the Mercury Plus V3.0 to anyone looking for an excellent resin cleaning station.

I just got my new wash and cure station and I am disappointed in how it is packaged. No protection between outside box and the product. Had a hole punched all the way through the outside box and you can see where it scratched the UV cover. Product is amazing though packaging could be improved

Great price and quality works perfectly to clean and cure my prints.

Not impressed at all, the power light to the pack is on but the unit won’t turn & is completely dead! My first purchase from Elegoo (Jupiter SE and this Mercury Plus V3) Not impressed one bit, if / when support sort this issue I will change my review. PS this looks to be a common problem with this machine.

The machine cures well with powerful LEDs. I have not used the wash functionality.

It has mirrors to reflect some of the UV to the bottom of the models being cured, not sure how well that works, but probably better than nothing. Only a he outer edge of the curing area are affected by the reflected light which isn’t ideal.

The overall build of the machine is very lightweight and a lot of plastic unlike the old Anycubic wash&cure this replaces. Time will tell on how it holds up, but it seems ok so far.

The curing area is much improved over the Anycubic which is very nice.

The controls are a bit disappointing. Every time you run it, the cure butting needs to be pressed followed by repeated presses of the time increment button. Having to do this when curing several batches is a bit irritating. The Anycubic at least kept track of the function and had a dial that was fast to increase time.

Overall I’m satisfied with this unit so far.

Cleaning resin printing is not easy but this set definitely made my life easier, is absolutely worth the extra dollars.

Why limit your build area? I started with the Mercury XS but just get this. It's better engineered, larger (build volume) and takes up less space.

Happy with the sealed wash tank to keep fumes down, but similar to others, very disappointed that the built the white base plastic out of something susceptible to damage by the Resin Detergent. I accidentally splashed a bit when filling the tank the first time, and it immediately softened the base and made it sticky. Quickly wiping it off and letting it 'air dry' allowed it to recover, but this seems like a major ovesight.

I don’t usually leave reviews, but this is worthy of one!

The Bundle I Ordered was great, printer, cleaning station and resin at a discount.

The printer produces great results and worked out of the box with minimal setup.

The Wash n Cure station makes post processing a breeze.

After the initial purchase, I did order the Mars Mate Purifier and a 2nd Wash n Cure container for 2 stage washing.

The “Worry Free Purchase” AddOn was just an added bonus and I didn’t need to use it as everything was well packaged and arrived quickly!

I have emailed support a few times with some questions and factoring in the time zone difference that have promptly responded.

My overall experience has been great and I’m considering ordering another printer, the Centauri Carbon just so I can print even larger and with Carbon Fiber Filament.

i’m very glad i bought this. definitely worth it, though i will say the washing bucket thing is a bit hard to wash .

used with isopropyl alcohol, washer works great to clean resin prints and cure them, has made after-print processing easy.

Handy

My only issue is that this thing is very loud when washing. It has a high pitch scream.

be careful of what liquid hits the plastic of this. The resin detergent eats this thing. other than that. its great.

I love how compact this is compared to the old multi base systems. Cleans and cures with no issues.

does the job

This was a good replacement for my last wash and cure station. It was delivered quickly and works well.

Some like 2 stations but for people with limited space this all in 1 is perfect

It’s a wash and cure station like many other wash and cure stations. I give it three stars because it is to put it simply… it’s adequate.

It does its job nothing exceptional, nothing deficient. Just like most other wash and cure stations

Excellent size and very quiet. However, a curing light from the top would be a nice addition, similar to the flexicure on Anycubic curing stations.

Shipping was fast and product packaged very well. Been great so far.

It does what it does nothing special. Cover is very difficult on the wash tube to get off.

Purchased this in November 24 and now7/25 and it's literally in pieces inside the unit. Where the LED mounts onto the body had become so brittle that one of the screw mounts inside deteriorated. INSIDE. The base is literally falling apart. Where the LEDS mount has caved and cracked 3 to 4 inches down (below the mirrors). I cannot recommend skipping this.

This is not the solution you're looking for.

The Mercury Plus V3.0 wash and cure station is a game-changer for my post-processing routine. It’s well-designed, intuitive, and does a fantastic job at both washing and curing prints. The build quality is solid, and the dual-function system saves a ton of space. The rotating platform ensures even curing, and the adjustable timer helps tailor the process to each resin type. It pairs perfectly with the Saturn 4 Ultra and keeps my prints clean, strong, and ready for finishing. A must-have accessory!

It seemed to be one of the few wash/cure stations that could actually hold the build plate while cleaning.

The machine would not turn on. Tried all sorts of plugs and outlets. Also these only last a few months and then need to be replaced when the motor dies

Elegoo Customer Service need training. Their machine arrived faulty. Unable to pass a their own self test and they will not accept responsibility. No matter how many times you explain, they keep finding a new way not to accept responsibility for their malfunctioning product.

I dont know how I got by as long as I did without one of these. This makes processing my prints so much easier and faster. Do not hesitate to get this. Its got the volume to handle any print short of something filling a Jupiter. Well worth every penny.

I filled a container with water to submerge my part during the cure to prevent warping and the drive motor for the turn plate stalls out and will not rotate. The container held somewhere around 2 Liters give or take which is about 2lbs. I had to pour water off until about 1.5L was remaining and then it was able to spin consistently.

Strangely I had no issues with the smaller Mercury V2.0 even with more water, but the size of the unit wasn't large enough and I had to 'trick' it to fit the same container and run with the lid to the cure station off. But it rotated fine. I'm not sure why this system seems to have so much trouble.

If water curing is a must for you, I would look elsewhere.

I have always used vats for my 3d model cleaning, but they vats got worn out. I have a Saturn, Saturn 2 and a Mars Pro, so I needed something to handle the size. The price was very reasonable and the unit works great. I'm not using the UV as I have a good UV enclosure. I have always bought Elegoo and their support is top notch above anyone else.