ELEGOO OrangeStorm Giga FDM 3D Printer with a Printing Size of up to 800mm x 800mm x 1000mm, Efficient Heated Bed, Support Multi-Nozzle Printing, and 300mm/s Printing Speed.

Elegoo Saturn 4 Ultra 16K offers high speed at 150 mm/h, smart heating, amazing precision and easy use, quite the best resin 3D printer for beginners & pros in 2025.  

Elegoo Centauri Carbon 2 Combo is a multicolor 3D printer with up to 500 mm/s speed, auto calibration, and a 350°C hardened nozzle. Ideal for beginners and pros.

ELEGOO Neptune 4 Plus FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size Pre-installed Klipper Firmware: Neptune 4 Plus comes with pre-installed Klipper firmware and supports input shaping and pressure advance. This enables an impressive printing speed of up to 500mm/s (default 250mm/s) while maintaining print quality. Both X-axis and Y-axis have acceleration sensors for automatic calibration of resonance compensation to minimize vibrations and improve print precision. Large Build Volume: Unleash your creativity with a generous build volume of 320x320x385mm³/12.59x12.59x15.15 inch. This sizable printing area allows you to create larger models or multiple smaller objects in a single print, expanding your creative possibilities. Dual-Gear Direct Extruder: The printer adopts a dual-gear direct extruder with a 5.2:1 reduction ratio, ensuring smooth and precise filament feeding. The full titanium alloy throat pipe facilitates fast heat dissipation, reducing nozzle clogs for consistent and reliable printing. 300°C High-Temp Nozzle: The 300°C high-temp nozzle kit features an extended hot end, a 60W ceramic heating element and a brass heating block, capable of printing various filaments including nylon. The automatic calibration of nozzle PID parameters ensures precise temperature control for stable and consistent printing performance. Auto Bed Leveling + Auxiliary Leveling: Achieve excellent first-layer adhesion and print quality with the 121 (11x11) points auto bed leveling system. Additionally, fine-tune the bed's leveling manually with the hand-twist knobs for optimal alignment and printing conditions. Efficient Cooling System: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for omnidirectional heat dissipation and preventing filament warping or deformation. The 2x6025 ball-bearing blower fans behind the print head further enhance cooling performance by rapidly cooling the newly deposited layers.

Elegoo Mars 5 Ultra offers blazing speed at 150mm/h, AI camera & auto leveling with amazing precision, quite the best affordable resin 3D printer for beginners.

Elegoo Centauri Carbon 2 Combo is a multicolor 3D printer with up to 500 mm/s speed, auto calibration, and a 350°C hardened nozzle. Ideal for beginners and pros.

Experience flawless 3D printing with multi-material freedom, smart auto-calibration, and silent high-speed performance — perfect for beginners and pros alike.

ELEGOO OrangeStorm Giga FDM 3D Printer with a Printing Size of up to 800mm x 800mm x 1000mm, Efficient Heated Bed, Support Multi-Nozzle Printing, and 300mm/s Printing Speed.

Create vibrant four-color prints with ease. The Centauri 2 Combo makes multicolor printing simple, reliable and accessible for makers of all skill levels.

The First emoji®-themed 3D PrinterEverything that feels like you—now in a form you can see, hold, and keep close.Inspired by you. Made by you.More color. More you.Make something that feels like you.An accessory that matches your energy. A desk object that showcases your taste. A gift that hits the mark without explanation.No design skills needed. Pick a model, choose colors and materials, tap print, and welcome your new creation.• Iconic emoji® Exterior    • emoji® Style Build Plate    • Custom UI & emoji® Models    Quality that matches your vibeFrom emojis to everyday creations, everything comes out clean, sharp, and true to design, thanks to precision motion control. Want one in another color? Just print it again.

ELEGOO Neptune 4 Max FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 420x420x480mm³/16.53x16.53x18.89 Inch Printing Size Pre-installed Klipper Firmware: The Neptune 4 Max comes with the powerful Klipper firmware, enabling impressive printing speeds of up to 500mm/s (default 250mm/s) and up to 8000mm/s accelerations, supporting advanced features such as input shaping and pressure advancing. Equipped with acceleration sensors on the X and Y axes for automatic calibration and improved print quality. Massive Build Volume: With a spacious build volume of 420x420x480mm³, our printer allows you to bring your ambitious designs to life, whether for large models or multiple smaller objects, this generous build volume provides ample space for your creations. Dual-Gear Direct Extruder: Our printer boasts a dual-gear direct extruder with a 5.2:1 reduction ratio for reliable filament feeding and optimal extrusion. The full titanium alloy throat pipe enhances heat dissipation, reducing filament clogs and maintaining consistent printing performance. 300°C High-Temp Nozzle Kit: Our printer features a high-temp nozzle kit capable of reaching up to 300°C. The extended hot end design, along with the 60W ceramic heating element and brass heating block ensure fast and uniform filament melting and extrusion. Automatic calibration of nozzle PID parameters further improves temperature control stability. Auto Bed Leveling + Auxiliary Leveling: Enjoy hassle-free bed leveling with the 121 (11x11) points auto bed leveling system! Additionally, auxiliary leveling by hand-twist knobs allows further fine-tuning, ensuring that your first-layer printing comes out perfectly every time. Effective Cooling Performance: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for comprehensive and efficient heat dissipation. Two additional 6025 ball-bearing blower fans behind the print head quickly cool down the newly deposited hot filaments, preventing warping or deformation for better overhang and bridge results.  

ELEGOO Neptune 4 Plus FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size Pre-installed Klipper Firmware: Neptune 4 Plus comes with pre-installed Klipper firmware and supports input shaping and pressure advance. This enables an impressive printing speed of up to 500mm/s (default 250mm/s) while maintaining print quality. Both X-axis and Y-axis have acceleration sensors for automatic calibration of resonance compensation to minimize vibrations and improve print precision. Large Build Volume: Unleash your creativity with a generous build volume of 320x320x385mm³/12.59x12.59x15.15 inch. This sizable printing area allows you to create larger models or multiple smaller objects in a single print, expanding your creative possibilities. Dual-Gear Direct Extruder: The printer adopts a dual-gear direct extruder with a 5.2:1 reduction ratio, ensuring smooth and precise filament feeding. The full titanium alloy throat pipe facilitates fast heat dissipation, reducing nozzle clogs for consistent and reliable printing. 300°C High-Temp Nozzle: The 300°C high-temp nozzle kit features an extended hot end, a 60W ceramic heating element and a brass heating block, capable of printing various filaments including nylon. The automatic calibration of nozzle PID parameters ensures precise temperature control for stable and consistent printing performance. Auto Bed Leveling + Auxiliary Leveling: Achieve excellent first-layer adhesion and print quality with the 121 (11x11) points auto bed leveling system. Additionally, fine-tune the bed's leveling manually with the hand-twist knobs for optimal alignment and printing conditions. Efficient Cooling System: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for omnidirectional heat dissipation and preventing filament warping or deformation. The 2x6025 ball-bearing blower fans behind the print head further enhance cooling performance by rapidly cooling the newly deposited layers.

Print faster with Centauri 2, a high-speed CoreXY 3D printer featuring easy setup, smart auto-calibration and reliable precision for consistent, high-quality results.

ELEGOO Neptune 4 Pro FDM 3D Printer with Up to 500mm/s Printing Speed, Auto Bed Leveling, Dual-Gear Direct Extruder, 300℃ High-temp Nozzle, Intelligent Segmented Heatbed, 225x225x265mm³ /8.85x8.85x10.43 Inch Printing Size Pre-installed Klipper Firmware: The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s  (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models. The 8GB RAM can store many models and quick access when needed. Dual-Gear Direct Drive Extruder: The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improves heat dissipation and reduces nozzle clogging. 300°C High-temp Nozzle: With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed. Intelligent Segmented Heatbed: With 100W+150W power output, the slicing software automatically recognizes the model's size during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance. Auto Bed Leveling + Auxiliary Leveling: With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without needing manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality. Efficient Heat Dissipation: ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball-bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.

ELEGOO Neptune 4 FDM 3D Printer with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 225x225x265mm³ /8.85x8.85x10.43 Inches. Pre-installed Klipper Firmware: With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models. 8G RAM provides enough storage space for fast printing. Dual-Gear Direct Extruder: The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk. 300°C High-temp Nozzle: With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon. Auto Bed Leveling: The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For perfect first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend. Efficient & Instant Cooling: The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 4x4020 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed. Removable Capacitive Touchscreen: The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience. The gantry's LED light strip with 30 beads and a hood, combined with an LED light on the nozzle for observing the model printing in a dark environment.

Overview of Neptune 3 Pro: 225*225*280mm market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation. Dual-Gear Direct Extruder: The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS. Nozzle Kit for Better Printing Effect: The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle. The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging. Fans on both sides of the print head ensure omnidirectional and rapid cooling of printed layers to improve the model details and overhang printing effect. Smarter Printing Experience: Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms.) Intelligent fan control: after printing, all fans will automatically stop working below 50℃ to extend fan lifespan, reduce noise, and save power. Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage. More Stable Printing: The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life. Ease of Use: PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet. The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress. The 250W high-power hotbed can quickly heat up to 100ºC and start printing. The integrated LED light bar on the gantry can be operated by pressing the buttons on the screen to conveniently observe the model printing in a poor light environment.  

Enjoy CoreXY high speed and advanced materials with Elegoo Centauri Carbon. Get ultra-detailed prints with easy Plug-N-Play, built for both beginners & pros.

Complete all-in-one bundle for Centauri Carbon 2 Combo. Includes everything needed for seamless multicolor 3D printing, from setup to first print.      

Enjoy seamless multicolor 3D printing at home with Centauri Carbon 2 Combo Value Bundle. Achieve faster, quieter, and more precise prints every time.    

Experience advanced 3D printing with Centauri Carbon 2 Combo and fiber-reinforced filaments, ideal for high-performance engineering models.

Print smarter with Centauri Carbon 2 Combo and PLA (RFID) filaments. Enjoy auto filament recognition and effortless multicolor 3D printing.

Print smarter with Centauri Carbon 2 Combo and PLA (RFID) filaments. Enjoy auto filament recognition and effortless multicolor 3D printing.

Create stunning multicolor prints with fewer failures. Keep filament dry for smoother extrusion, cleaner surfaces and more consistent results every time. 

Create stunning multicolor prints with Centauri Carbon 2 Combo and PLA Matte filament bundle. Enjoy a premium matte texture and flawless finishes every time.

ELEGOO Centauri Carbon 2 Combo + 4 kg PLA Basic with Refillable Spool (Basic Colors)

10-Inch 12K Mono LCD: With a 10-inch 12K mono LCD boasting an incredible resolution of 11520x5120 and an XY resolution of 19x24μm, you can print highly detailed models with stunning clarity and precision. The 9H tempered glass above the LCD provides excellent durability and scratch resistance, effectively protecting the LCD screen from scratches and damage. Large Build Volume: With a spacious build volume of 218.88x122.88x260 mm³/8.62x4.84x10.24 inches, you can print larger objects with ease or multiple smaller models at once, increasing your productivity. Brand New Linux OS: ELEGOO Saturn 3 UItra is powered by a brand new Linux OS with 4G RAM, which guarantees stable file transfer and faster running speed, making your printing experience smoother and more efficient. Wi-Fi Transfer: Saturn 3 UItra supports Wi-Fi transfer of files, with transfer speeds of 6-10Mbps, and is compatible with both 2.4G and 5G networks, giving you the flexibility to transfer your files from your computer or mobile device with ease. Reliable Printing Performance: The printer's 4-point leveling system is easy to operate, and no need to repeat leveling after one leveling. The laser-engraved build plate provides excellent adhesion during the printing process and easy to remove models. The new ACF release liner film with less release tension for faster printing. User-Friendly Printing Experience: Saturn 3 UItra adopts a 4-inch HD IPS touch screen, with 800*480px and a new UI interface, and supports 12 languages. The plug-in air purifier is connected via USB with a built-in activated carbon filter to absorb and filter resin odor during printing. The printer is also compatible with the upcoming ELEGOO Mars MATE air purifier.

Overview of Neptune 3 Pro: 225*225*280mm market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation. Dual-Gear Direct Extruder: The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS. Nozzle Kit for Better Printing Effect: The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle. The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging. Fans on both sides of the print head ensure omnidirectional and rapid cooling of printed layers to improve the model details and overhang printing effect. Smarter Printing Experience: Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms.) Intelligent fan control: after printing, all fans will automatically stop working below 50℃ to extend fan lifespan, reduce noise, and save power. Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage. More Stable Printing: The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life. Ease of Use: PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet. The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress. The 250W high-power hotbed can quickly heat up to 100ºC and start printing. The integrated LED light bar on the gantry can be operated by pressing the buttons on the screen to conveniently observe the model printing in a poor light environment.  

ELEGOO Neptune 4 Plus FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size Pre-installed Klipper Firmware: Neptune 4 Plus comes with pre-installed Klipper firmware and supports input shaping and pressure advance. This enables an impressive printing speed of up to 500mm/s (default 250mm/s) while maintaining print quality. Both X-axis and Y-axis have acceleration sensors for automatic calibration of resonance compensation to minimize vibrations and improve print precision. Large Build Volume: Unleash your creativity with a generous build volume of 320x320x385mm³/12.59x12.59x15.15 inch. This sizable printing area allows you to create larger models or multiple smaller objects in a single print, expanding your creative possibilities. Dual-Gear Direct Extruder: The printer adopts a dual-gear direct extruder with a 5.2:1 reduction ratio, ensuring smooth and precise filament feeding. The full titanium alloy throat pipe facilitates fast heat dissipation, reducing nozzle clogs for consistent and reliable printing. 300°C High-Temp Nozzle: The 300°C high-temp nozzle kit features an extended hot end, a 60W ceramic heating element and a brass heating block, capable of printing various filaments including nylon. The automatic calibration of nozzle PID parameters ensures precise temperature control for stable and consistent printing performance. Auto Bed Leveling + Auxiliary Leveling: Achieve excellent first-layer adhesion and print quality with the 121 (11x11) points auto bed leveling system. Additionally, fine-tune the bed's leveling manually with the hand-twist knobs for optimal alignment and printing conditions. Efficient Cooling System: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for omnidirectional heat dissipation and preventing filament warping or deformation. The 2x6025 ball-bearing blower fans behind the print head further enhance cooling performance by rapidly cooling the newly deposited layers.

With a professional 10" 12K LCD, ELEGOO Saturn 4 prints with high quality and fast speed (70mm/H), making it the best budget resin 3D printer to buy 2024.

Elegoo Saturn 4 Ultra 16K offers high speed at 150 mm/h, smart heating, amazing precision and easy use, quite the best resin 3D printer for beginners & pros in 2025.

Elegoo Mars 5 Ultra offers blazing speed at 150mm/h, AI camera & auto leveling with amazing precision, quite the best affordable resin 3D printer for beginners.

ELEGOO Neptune 4 Max FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 420x420x480mm³/16.53x16.53x18.89 Inch Printing Size Pre-installed Klipper Firmware: The Neptune 4 Max comes with the powerful Klipper firmware, enabling impressive printing speeds of up to 500mm/s (default 250mm/s) and up to 8000mm/s accelerations, supporting advanced features such as input shaping and pressure advancing. Equipped with acceleration sensors on the X and Y axes for automatic calibration and improved print quality. Massive Build Volume: With a spacious build volume of 420x420x480mm³, our printer allows you to bring your ambitious designs to life, whether for large models or multiple smaller objects, this generous build volume provides ample space for your creations. Dual-Gear Direct Extruder: Our printer boasts a dual-gear direct extruder with a 5.2:1 reduction ratio for reliable filament feeding and optimal extrusion. The full titanium alloy throat pipe enhances heat dissipation, reducing filament clogs and maintaining consistent printing performance. 300°C High-Temp Nozzle Kit: Our printer features a high-temp nozzle kit capable of reaching up to 300°C. The extended hot end design, along with the 60W ceramic heating element and brass heating block ensure fast and uniform filament melting and extrusion. Automatic calibration of nozzle PID parameters further improves temperature control stability. Auto Bed Leveling + Auxiliary Leveling: Enjoy hassle-free bed leveling with the 121 (11x11) points auto bed leveling system! Additionally, auxiliary leveling by hand-twist knobs allows further fine-tuning, ensuring that your first-layer printing comes out perfectly every time. Effective Cooling Performance: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for comprehensive and efficient heat dissipation. Two additional 6025 ball-bearing blower fans behind the print head quickly cool down the newly deposited hot filaments, preventing warping or deformation for better overhang and bridge results.  

ELEGOO Mercury XS Bundle with Separate Washing and Curing Station for Large Resin 3D Printed Models, Compatible with Saturn and Mars LCD 3D Printers, with a Handheld UV Lamp [360° all-round exposure] The post-curing station adopts 2 L-shape light bars (each built-in 14 UV LED lights), and added 4 UV LED beads beneath the turntable. Work with 360°auto-rotating turntable and a handheld UV lamp that cures the nooks and crannies and interior of 3D prints, so that the entire model is cured thoroughly without dead ends. [Dual function of washing and curing]  ELEGOO Mercury XS contains 1 washing station and 1 post-curing station, with the dual function of cleaning and curing to remove uncured resin of 3D printed models and optimized your print quality, making your post-processing simple and efficient. [Large washing volume] With an 7000ml large capacity sealed water tank, you can directly wash large models printed by ELEGOO Saturn and Mars 3, or clean parts in batches, which offers substantial time savings and improves your productivity. [Easy and intuitive operation] With a single knob, just press and hold to turn on the machine, then rotate the knob to set an appropriate time for washing or curing, and your models will be ready in a short time. The UV cover can block 99.9% of ultraviolet rays and protect your eyesight during post-curing. [Wide Compatibility] Directly compatible with ELEGOO Saturn or Mars 3 3D printers and the most similar build volume LCD/DLP/SLA 3D resin printers on the market, making your 3D resin print post-processing simple, professional, and efficient.

ELEGOO Neptune 4 Plus FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size Pre-installed Klipper Firmware: Neptune 4 Plus comes with pre-installed Klipper firmware and supports input shaping and pressure advance. This enables an impressive printing speed of up to 500mm/s (default 250mm/s) while maintaining print quality. Both X-axis and Y-axis have acceleration sensors for automatic calibration of resonance compensation to minimize vibrations and improve print precision. Large Build Volume: Unleash your creativity with a generous build volume of 320x320x385mm³/12.59x12.59x15.15 inch. This sizable printing area allows you to create larger models or multiple smaller objects in a single print, expanding your creative possibilities. Dual-Gear Direct Extruder: The printer adopts a dual-gear direct extruder with a 5.2:1 reduction ratio, ensuring smooth and precise filament feeding. The full titanium alloy throat pipe facilitates fast heat dissipation, reducing nozzle clogs for consistent and reliable printing. 300°C High-Temp Nozzle: The 300°C high-temp nozzle kit features an extended hot end, a 60W ceramic heating element and a brass heating block, capable of printing various filaments including nylon. The automatic calibration of nozzle PID parameters ensures precise temperature control for stable and consistent printing performance. Auto Bed Leveling + Auxiliary Leveling: Achieve excellent first-layer adhesion and print quality with the 121 (11x11) points auto bed leveling system. Additionally, fine-tune the bed's leveling manually with the hand-twist knobs for optimal alignment and printing conditions. Efficient Cooling System: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for omnidirectional heat dissipation and preventing filament warping or deformation. The 2x6025 ball-bearing blower fans behind the print head further enhance cooling performance by rapidly cooling the newly deposited layers.

ELEGOO Neptune 4 Pro FDM 3D Printer with Up to 500mm/s Printing Speed, Auto Bed Leveling, Dual-Gear Direct Extruder, 300℃ High-temp Nozzle, Intelligent Segmented Heatbed, 225x225x265mm³ /8.85x8.85x10.43 Inch Printing Size Pre-installed Klipper Firmware: The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s  (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models. The 8GB RAM can store many models and quick access when needed. Dual-Gear Direct Drive Extruder: The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging. 300°C High-temp Nozzle: With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed. Intelligent Segmented Heatbed: With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance. Auto Bed Leveling + Auxiliary Leveling: With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality. Efficient Heat Dissipation: ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.  

ELEGOO Neptune 4 FDM 3D Printer with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 225x225x265mm³ /8.85x8.85x10.43 Inches Pre-installed Klipper Firmware: With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models. 8G RAM provides enough storage space for fast printing.  Dual-Gear Direct Extruder: The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk. 300°C High-temp Nozzle: With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon. Auto Bed Leveling: The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For perfect first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend. Efficient & Instant Cooling: The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 4x4020 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed. Removable Capacitive Touchscreen: The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience. The gantry's LED light strip with 30 beads and a hood, combined with an LED light on the nozzle for observing the model printing in a dark environment.

【Overview of Neptune 3 Pro】225*225*280mm market mainstream printing size can meet the needs of most users.With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB.The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.   【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.   【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.Fans on both sides of the print head ensure omnidirectional and rapid cooling of printed layers to improve the model details and overhang printing effect.   【Smarter Printing Experience】Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms)Intelligent fan control: after printing, all fans will automatically stop working below 50℃ to extend fan lifespan, reduce noise, and save power.Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.   【More Stable Printing】The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor.The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.   【Ease of Use】PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet.The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress.The 250W high-power hotbed can quickly heat up to 100ºC and start printing.The integrated LED light bar on the gantry can be operated by pressing the buttons on the screen to conveniently observe the model printing in a poor light environment.

Enjoy CoreXY high speed and advanced materials with Elegoo Centauri Carbon. Get ultra-detailed prints with easy Plug-N-Play, built for both beginners & pros.

Smart self-check and auto-leveling is just a click away. Unlock effortless magic with Elegoo Mars 5, the best resin 3D printer for budget-savvy beginners.

ELEGOO Mercury Plus 2 in 1 Washing and Curing Station V2.0 for Mars Photon S Photon Mono LCD/DLP/SLA 3D Printed Models, Resin UV Curing Box with Rotary Turntable Upgrade Protection Function: Sealed washing to prevent the volatilization of alcohol during the cleaning process. Fan-less curing mode makes it quieter to use. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes. Intelligent Curing and Washing: The front TFT screen can directly display the setting time and remaining time, and the operation is simple and intuitive. With built-in 16 pcs of 405nm UV LED and a 360-degree rotating turntable, you can uniformly cure the model. Flexible Washing Mode: The models can be placed in a cleaning basket to be cleaned separately, or mount the build plate with models on it and wash them together, which can avoid direct contact with the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket. Ideal Compatibility: Compatible with most the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon s, etc, which provides you ideal support for washing and curing your 3D resin prints. Special Notes: The washing function is not quite suitable for 3D models printed with water-washable resin, which is better to be washed with running water. 

Elegoo Wash and Cure Station 3.0 offers a significantly larger capacity & 360° overall curing, making it one of the best choices for resin 3D printers like Saturn 4.

ELEGOO Mercury XS Bundle with Separate Washing and Curing Station for Large Resin 3D Printed Models, Compatible with Saturn and Mars LCD 3D Printers, with a Handheld UV Lamp [360° all-round exposure] The post-curing station adopts 2 L-shape light bars (each built-in 14 UV LED lights), and added 4 UV LED beads beneath the turntable. Work with 360°auto-rotating turntable and a handheld UV lamp that cures the nooks and crannies and interior of 3D prints, so that the entire model is cured thoroughly without dead ends. [Dual function of washing and curing]  ELEGOO Mercury XS contains 1 washing station and 1 post-curing station, with the dual function of cleaning and curing to remove uncured resin of 3D printed models and optimized your print quality, making your post-processing simple and efficient. [Large washing volume] With an 7000ml large capacity sealed water tank, you can directly wash large models printed by ELEGOO Saturn and Mars 3, or clean parts in batches, which offers substantial time savings and improves your productivity. [Easy and intuitive operation] With a single knob, just press and hold to turn on the machine, then rotate the knob to set an appropriate time for washing or curing, and your models will be ready in a short time. The UV cover can block 99.9% of ultraviolet rays and protect your eyesight during post-curing. [Wide Compatibility] Directly compatible with ELEGOO Saturn or Mars 3 3D printers and the most similar build volume LCD/DLP/SLA 3D resin printers on the market, making your 3D resin print post-processing simple, professional, and efficient.

ELEGOO Saturn 4 Ultra with 10" 12K LCD delivers precise prints & lightning fast speed (150mm/H), making it the best 3D printer for beginners and veterans.

With a professional 10" 12K LCD, ELEGOO Saturn 4 prints with high quality and fast speed (70mm/H), making it the best budget resin 3D printer to buy 2024.

【10-Inch 12K Mono LCD】With a 10-inch 12K mono LCD boasting an incredible resolution of 11520x5120 and an XY resolution of 19x24μm, you can print highly detailed models with stunning clarity and precision. The 9H tempered glass above the LCD provides excellent durability and scratch resistance, effectively protecting the LCD screen from scratches and damage. 【Large Build Volume】With a spacious build volume of 218.88x122.88x260 mm³/8.62x4.84x10.24 inches, you can print larger objects with ease or multiple smaller models at once, increasing your productivity. 【Brand New Linux OS】ELEGOO Saturn 3 UItra is powered by a brand new Linux OS with 4G RAM, which guarantees stable file transfer and faster running speed, making your printing experience smoother and more efficient. 【Wi-Fi Transfer】Saturn 3 UItra supports Wi-Fi transfer of files, with transfer speeds of 6-10Mbps, and is compatible with both 2.4G and 5G networks, giving you the flexibility to transfer your files from your computer or mobile device with ease. 【Reliable Printing Performance】The printer's 4-point leveling system is easy to operate, and no need to repeat leveling after one leveling. The laser-engraved build plate provides excellent adhesion during the printing process and easy to remove models. The new ACF release liner film with less release tension for faster printing. 【User-Friendly Printing Experience】Saturn 3 UItra adopts a 4-inch HD IPS touch screen, with 800*480px and a new UI interface, and supports 12 languages. The plug-in air purifier is connected via USB with a built-in activated carbon filter to absorb and filter resin odor during printing. The printer is also compatible with the upcoming ELEGOO Mars MATE air purifier.

【10-Inch 12K Mono LCD】With a 10-inch 12K mono LCD boasting a stunning resolution of 11520x5120 and an XY resolution of 19x24μm, ELEGOO Saturn 3 is capable of producing highly detailed and intricate models with ease, at a printing speed of up to 70mm/h. The 9H hardness tempered glass protects the LCD screen from scratches and damage caused by resin dripping or penetration. 【Generous Build Volume】With a generous build volume of 218.88x122.88x250 mm³/8.62x4.84x9.84 inches, you can try to print larger models and more ambitious projects for greater flexibility and versatility. 【Fresnel Collimating Light Source】The COB light source and Fresnel collimating lens work together to emit a uniform light beam of 405nm wavelength, and ensure that the light angle reaches within 5°, light uniformity is over 90%, and light-scattering coefficient within 0.5%. This results in highly accurate and consistent prints with exceptional clarity and detail. 【Laser-carved Build Plate】The build plate with a laser-carved surface provides excellent adhesion, ensuring that your prints stick to the build plate for a higher printing success rate. 【Voxeldance Tango Software】It offers 3 printing modes: static mode and dynamic mode (including smooth mode and high-speed mode) to improve printing efficiency. The open-source GOO slice file format is compatible with third-party slice software, such as CHITUBOX and Lychee Slicer. 【Plug-in Air Purifier】The upgraded USB plug-in air purifier with a built-in activated carbon filter and plastic protective case ensures that harmful odor is purified during printing. In addition, you can choose the upcoming ELEGOO Mars MATE air purifier, which can remove up to 95% of VOCs for a safer environment to work in.

7-Inch 9K Mono LCD: Equipped with a 7-inch 9K mono LCD offering an impressive 8520x4320 resolution and 18µm XY resolution, Mars 4 Ultra allows you to print incredible complex models with crisp details. The mono LCD is protected by a 9H hardness tempered glass, ensuring it withstands daily wear and tear while maintaining optimal performance. Powerful Linux OS: With built-in 4G RAM and no more delay loading files, the Linux operating system ensures faster & smooth operation and efficient resource management. Wi-Fi Connection: Effortlessly transfer files via the built-in WiFi connectivity, supporting both 2.4G and 5G networks with a transfer speed of 6-10Mbps, eliminating the need for cumbersome cables. Effortless Leveling: The 4-point hassle-free leveling system makes setup a breeze, and after one leveling, no need to repeat leveling, ensuring perfect prints every time. The laser-carved surface on the build plate offers improved adhesion, reducing the risk of print failures. Brand new ACF release liner film with less release tension for a high printing success rate even at a faster printing speed. User-Friendly Touch Screen: Navigate easily with the 4-inch HD IPS touch screen with a resolution of 800*480 pixels and support for 12 languages, making operation a breeze for users of all skill levels. Purified Printing Environment: The plug-in air purifier with an upgraded activated carbon filter that effectively filters out resin odor during printing. This feature enhances the overall printing experience and provides a healthier environment for you.