REVOPOINT RANGE 3D Scanner

$562.00 USD $359.99 USD
Shipping calculated at checkout.

SET: RANGE Standard Package
  • Free Shipping
  • 1-Year Warranty
  • 14 Days Return
  • Lifetime Support

SET: RANGE Standard Package
Product information

Where We Ship

Orders placed on ELEGOO US (us.elegoo.com) can be shipped to the United States:

Estimated Delivery Time:

  1. In-stock Product: 3-7 business days for delivery.
  2. Pre-owned Product: 4-10 business days for delivery.
  3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 business days for delivery.

Shipping Restrictions

  • We can ship orders to the contiguous 48 states and the District of Columbia, excluding Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern Mariana Islands, Palau, Puerto Rico, and the U.S. Virgin Islands.
  • Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

 

Shipping Fees:

  • On orders under $50, there is a shipping charge of $15.
  • FREE SHIPPING on orders over $50, EXCEPT for orders that include a Saturn 4 or Saturn 4 Ultra, for which there is a $20 shipping charge per Saturn 4 or Saturn 4 Ultra.

Ownership, Terms, and Risk

Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.

Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com

Refund Policy & Warranty Info

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

 

Warranty Policy

1. Warranty timeline

Models Parts List Warranty Period
3D Printing Related Products Neptune 3

Neptune 3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga
PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools No warranty
Hot End 3 Months
Extruder Kit 6 Months
Main Parts of the Machine 12 Months
Jupiter Release Film, Tools No warranty
LCD Screen 3 Months
Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine 12 Months
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra

Jupiter SE
Release Film, Tools No warranty
LCD Screen, Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine (FEP&Tools Excluded) 12 Months
Mercury
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Main Parts of the Machine (Tools Excluded) 12 Months
PHECDA LASER
ENGRAVER &
CUTTER-
10w/20W
Main Parts PCB, Motor, Laser head, Power Adapter 12 Months
Other Parts① Fans 6 Months
Other Parts② Synchronous belt, motor connection line, laser connection line 3 Months
Consumables and
Other attached
Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. No warranty
Arduino Kits, Robot Kits & Component Kits All All 12 Months
Pre-owned Products All All No warranty
Accessories (For individual purchases) Release Film:FEP/PFA/ACF Release film is a consumable product without warranty No warranty
LCD Screen:
Mars/Jupiter
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 3 Months
LCD Screen:
Mars 2/2 Pro/3/3 Pro/4/4 Ultra/4 Max/Saturn /S/2/8K/3/3 Ultra/4/4 Ultra/5/5 UltraJupiter SE
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 6 Months
Build Plate Damage caused by scratches, drops or bumps is not covered by the warranty. 6 Months
Resin Tank Installation tools and screws are not warranted 6 Months
Air Purifier:
Mini/USB/Mars Mate
Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
Mini Heater Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months

Washing Bucket:

Mercury Plus V1.0/ V2.0/V3.0

Mercury X/XS Bundle

No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). 6 Months
3D Stainless Steel Funnel 3D Stainless Steel Funnel is a consumable product without warranty No warranty
PEI Platform Kit/PEI Magnetic Platform Kit PEI Platform Kit is a consumable product without warranty No warranty
Nozzle Kit Nozzle Kit is a consumable product without warranty No warranty
PTFE Tube PTFE Tube is a consumable product without warranty No warranty
Hotend Kit Hotend Kit (Nozzle, PTFE Tube Excluded) 3 Months
Extruder Kit/Printhead Kit Entire Dual-Gear Direct Extruder Kit 6 Months
Cooling Fan Kit Including 4010/4015 Blower Fan and 6010 Axial Flow Fan 12 Months
STM 32-bit Silent Motherboard Motherboard 12 Months
Enclosure All 12 Months
Dual Printhead Mounting Plate All 12 Months
Four-Printhead Mounting Plate All 12 Months
5KG Large Spool Holder Kit All 12 Months
Camera All 12 Months
Filament Vacuum Storage Bags Kit The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. 1 Month
Rotary Attachment:
PHECDA Laser Engraver
All 12 Months
10W/20W Air Assist:PHECDA Laser Engraver All 12 Months
Enclosure:PHECDA Laser Engraver All 12 Months
Honeycomb Panel:
PHECDA Laser Engraver
Honeycomb Panel is a consumable product without warranty No warranty
Raisers:PHECDA Laser Engraver All 12 Months
Composite Filter:PHECDA Laser Engraver Composite Filter is a consumable product without warranty No warranty
10W/20W Laser Module:PHECDA Laser Engraver All 12 Months
Window Mirror:PHECDA Laser Engraver Window Mirror is a consumable product without warranty No warranty
20W Adapter:PHECDA Laser Engraver All 12 Months
Metal Business Cards All No warranty
Silicone Mat All No warranty





2. Warranty Rules for Laser Head and Tube

A. Laser Head WarrantyRules:
  The rate of laser power drop is related to the frequency of use, working hours, and working environment.

B. 
Laser Tube Warranty Rules:

a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;

b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;

c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.

 

3. Warranty Period

All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

 

4. Warranty Forfeiture

The following Conditions Are Not Covered Under Warranty:
A. Products without sufficient proof of purchase
B. Lost or stolen products
C. Items that have expired their warranty period
D. Non-quality-related issues (after 30 days of purchase)
E. Free products
F. Repairs through 3rd parties
G. Damage from outside sources
H. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
I. Purchases from illegitimate resourcesor second-handed parties
J. Normal discoloration, wear, or consumption during product use.

 

Return & Refund Policy

1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.

If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.

A. For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 5% restocking fee based on the order amount.

B. For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 15% restocking fee based on the order amount.

C. For used products or orders beyond 14 days, refunds for unwanted products are not available.

Unwanted Issue

 

Product Status

Items

Responsibility of Return Shipping Charges

Restocking Fee

Deduction Fee

Refund

Within 14 Days

Unopened

Customer

5% based on the order amount

If the returned machine detects key parts missing, the corresponding fees will be deducted.

Open-box and unused

Customer

15% based on the order amount

Used

×

×

×

Within Warranty

All Status

×

×

×

×

 

Important: After receiving the goods, please keep the original box for at least 14 days. lf you need to return the goods, you must pack the products in the original box.

For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.

The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.

After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.

 

2. For Quality-Related Items
*This clause does not apply to Pre-owned & Refurbished items.

 A. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.

B. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.

C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

Quality-Related Issue

 

Items

Responsibility of Fees

Refund

Replace

Repair

Return Shipping Charges

Repair Fees

Within 14 Days

Elegoo

Elegoo

Within Warranty

×

×

×

Elegoo

Out of Warranty

×

×

×

Customer

Important:

1. After receiving the goods, please keep the original box for at least 14 days. lf you need to return the goods, you must pack the products in the original box.

2. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

3. Process After Returning Product

After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

 

Contact Us

Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

  1. For 3D printer technical support: 3dp@elegoo.com
  2. For laser engraver technical support: lec@elegoo.com
  3. For order issues, unwanted item refunds, or returns: info@elegoo.com
  4. For STEM kits, robots technical support: service@elegoo.com

When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

 
ELEGOO Revopoint Range 3D Scanner

Big Scans, Big Detail

Welcome to a world of affordable and accurate large object 3D scanning. The RANGE’s powerful infrared light projector offers up to 800mm scanning distance while retaining an impressive single-frame precision of up to 0.1mm. Makes the RANGE a powerful tool for scanning large objects like cars, furniture, and industrial parts. It even makes scanning a person in just one scan possible.

ELEGOO Revopoint Range 3D Scanner parameter icon

Big Capture Area

Boasting a single capture range of 360mm x 650mm@600mm, scanning cars, furniture, people, and many other large objects have never been more accessible.

ELEGOO Revopoint Range 3D Scanner Big Capture Area

Accurate Measurements

Whether it’s for reverse engineering, quality control, or design, RANGE’s 0.1mm single-frame precision delivers reliably accurate models.

ELEGOO Revopoint Range 3D Scanner Accurate Measurements
ELEGOO Revopoint Range 3D Scanner 800mm Scan Distance

800mm Scan Distance

Efficiently capture large objects with the RANGE's new powerful infrared projector with brighter and higher resolution structured light powering a 300mm to 800mm working distance and a 360mm x 650mm @600mm single capture range.

ELEGOO Revopoint Range 3D Scanner Full Body Scans

Full-body Scans

Simplify the creation of human 3D models for video games, fashion design, AR, and VR applications, with the whole body and head scan done in under two minutes.


3D print a near-lifelike miniature model for a unique gift or wedding cake topper. And with the help of the Large Turntable, you can do it even faster.

ELEGOO Revopoint Range 3D Scanner Streamlined Car Modeling

Streamlined Car Modeling

Always ensure custom or replacement pieces will fit your car with accurate 3D models created in minutes instead of hours.

What's In Box

RANGE Standard Package

ELEGOO Revopoint Range 3D Scanner What's in box for Standard Package

RANGE Premium Package

ELEGOO Revopoint Range 3D Scanner What's in box for Premium Package

Specification

Product Model

Revopoint Range 3D Scanner

Technology

Dual Camera Infrared Light

Light Source

Class 1 Infrared Light

Dimensions

295mm x 41.5mm x 28.2mm

Single-frame Precision

Up to 0.1mm

Point Distance

0.3mm

Single Capture Range

360mm x 650mm @600mm

Working Distance

300mm ~ 800mm

Scan Speed

12fps - 18fps

Bluetooth

4.1

Scanner Weight

210g

Output Format

PLY, OBJ, and STL

Connection Modes

USB 3.0, and Wi-Fi 5.1

Hardware Button

Start/Pause Scan

Color Scanning

Yes

Alignment

Feature/Marker

Compatible with

Windows 8/10/11 (64-bit), Android, iOS, macOS

Special Object Scanning

Use scanning spray and the correct scanning mode for transparent, dark, or highly reflective objects.

Show More(12+)

Note:

  1. Accuracy was acquired in a controlled lab environment. Actual results might vary, subject to the operation environment.
  2. Windows 7 is not supported.
  3. iOS devices only support Wi-fi connection.
  4. Revo Scan only supports model editing features in Windows and macOS. Models made on Android and iOS must be exported to a PC for editing.
  5. Avoid direct sunlight when scanning outdoors.
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer

FAQs

1. What are the differences between the RANGE, POP 2, and MINI?

● Scenarios and Scanning Abilities:

1) RANGE uses structured infrared light to efficiently scan large objects like furniture, human bodies, or cars.
2) MINI uses structured blue light and is for scanning small objects like jewelry, miniatures, or fasteners and capturing all their fine details.
3) POP 2 uses structured infrared light and is for scanning medium objects like engine parts or vases.


● Recommend Scan Volumes:

MINI: 10mm x 10mm x10mm ~ 500mm x 500mm x 500mm.
POP 2: 20mm x 20mm x 20mm ~ 2500mm x 2500mm x 2500mm.
RANGE: 50mm x 50mm x 50mm ~ 4000mm x 4000mm x 4000mm.


● What comes with the Large Turntable, and what are its specifications?
What’s in the Box?

① Large Turntable
② Remote Controller
③ Power Cable
④ Multi-region Adapter (Supports US/EU/AU/GB plug types)


● Large Turntable Specifications:

Power Output: 24V/3A
Dimensions: (H) 100mm X (D) 502mm
Speed: 35 - 90 Seconds per Rotation
Max Load: 200kg
Product Gross Weight: 7kg
Control Method: Via Remote Controller / APP
Rotation Control: Direction, Speed, and Start/Pause
Noise: ≤55 (DB)
Main Materials: ABS+PC

2. Do you need a powerful computer to use the RANGE?

No, the RANGE's algorithms and internal chip do most of the heavy processing.Minimum Specifications: Intel i5, 8GB RAM.Recommended Specifications: Intel i7, 16GB RAM.No discrete GPU is needed.

3. Are there any objects that the RANGE can't scan?

Yes, the RANGE is unsuitable for scanning objects smaller than its minimum scan volume of 50mm x 50mm x 50mm. Also, like most 3D scanners, highly reflective, transparent, or dark objects can only be effectively scanned using 3D scanning spray to coat the object’s surface.

4. Can 3D models created with the RANGE be 3D printed?

Yes, the scanned models can be output in STL format, which is compatible with most slicer software.

5. Can I use the RANGE outdoors?

Yes, but it will not work well in direct sunlight. Also, the RANGE is not water resistant, so avoid outdoor scanning on rainy days.

6. Can scanned models be modified with design software?

Yes, the 3D models made with RANGE can be exported in OBJ format, which is compatible with most design software, such as Autodesk CAD, Blender, Maya, Rhino, Zbrush, Fusion 360, etc.

7. Can the RANGE safely scan people and animals?

Yes, the RANGE is entirely safe because it uses class 1 infrared light, which means it is not capable of causing any eye damage even if it’s directly aimed into an eye.

8. What devices is the RANGE compatible with?

The RANGE can work with devices using:

  • Windows ≥ 8 (64-bit) can connect via USB or Wi-Fi
  • Android ≥ 9.0 (RAM≥6GB) can connect via USB or Wi-Fi
  • macOS ≥ Intel x86 chips 10.15 and M chips 11.0 can connect via USB or Wi-Fi
  • iOS ≥ 13.0 (iPhone 8 and onwards) iOS devices can only be connected via Wi-Fi