












Saturn 3
Shipping calculated at checkout.
- 10-inch 12K Mono LCD
- Laser-carved Build Plate
- XY Resolution of 19×24μm
- COB + Fresnel Collimating Lens
- Build Volume of 218.88×122.88×250 mm³
Product information
Where We Ship
Orders placed on ELEGOO US (us.elegoo.com) can be shipped to the United States.
1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.
Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.
Shipping Restrictions
- Your order can be delivered to any of the 48 contiguous U.S. states or Washington, D.C. However, we currently do not ship to Alaska, Hawaii, U.S. territories (American Samoa, Guam, Northern Mariana Islands, Puerto Rico, and the U.S. Virgin Islands), or Freely Associated States (Federated States of Micronesia, Marshall Islands, and Palau).
- Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees:
Ownership, Terms, and Risk
1. Please ensure your shipping address is accurate. Once the package is dispatched, we cannot reroute it. You are solely responsible for verifying the address. If a loss occurs due to an incorrect address or a fraudulent transaction, you will be liable for all financial losses.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any courier services.
2. Orders (excluding Pre-Orders) are typically forwarded to the warehouse 8 hours after placement. Once submitted to the warehouse, orders are generally non-cancellable and non-modifiable. If modifications are required, we will attempt to coordinate with the warehouse; however, success cannot be guaranteed. Costs incurred due to address errors or cancellations are subject to our Return & Refund Policy, and you will be responsible for payment.
3. Please ensure all order details are accurate and your phone is accessible. If a product is returned due to the following reasons, we reserve the right to charge return shipping fees and redelivery costs prior to resending the item:
A. Failure to contact the delivery carrier within 5 days of a delivery attempt.
B. Incorrect shipping address provided.
FAQ
Q: If I order multiple products, will they be delivered together?
A: We aim to ship items together whenever possible. However, depending on product availability or shipping requirements, items may arrive separately. You will receive a notification email for each shipment.
Refund Policy & Warranty Info
Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.
Warranty Policy
1. Warranty timeline
2. Warranty Period
All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.
3. Warranty Forfeiture
The following Conditions Are Not Covered Under Warranty:
A. Product is not from ELEGOO or distributors authorized by ELEGOO
B. Products without purchase receipt or any other sufficient proofs of purchase
C. Lost or stolen products
D. Items that have expired their warranty period
E. Non-quality-related issues (after 30 days of purchase)
F. Free products
G. Repaired by a third party or modified by an individual
H. Damage from outside sources
I. Damage from misuse of products (including, but not limited to: resin leakage, falls, and operating devices improperly)
J. Normal discoloration, wear, or consumption during product use
K. The LCD screen cannot provide an SN code
Return & Refund Policy
1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.
Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.
If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we refer to such a product as an "unwanted product".
A. For unopened products (with all original tags and labels attached), you can return them within 14 days of delivery for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.
B. For open-box and unused products, within 14 days of delivery, you can return them for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.
C. For used products or orders beyond 14 days, refunds for unwanted products are not available.
Important:
1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.
2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.
3. The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo's sole discretion.
2. For Quality-Related Items
*This clause does not apply to Pre-owned & Refurbished items.
Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.
A. Product is defective when you receive it, within 14 days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.
B. Beyond the 14 days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.
C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.
Important:
1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.
2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.
3. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).
3. Process After Returning Product
After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.
Contact Us
Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.
- For 3D printer technical support: 3dp@elegoo.com
- For laser engraver technical support: lec@elegoo.com
- For order issues, unwanted item refunds, or returns: info@elegoo.com
- For STEM kits, robots technical support: service@elegoo.com
When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

10-Inch 12K Mono LCD
10-Inch 12K Mono LCD

Fresnel Collimating
Light Source
Fresnel Collimating
Light Source

Voxeldance Tango Software
Voxeldance Tango Software

Plug-in Air Purifier
Plug-in Air Purifier

Generous Build Volume
Generous Build Volume

Laser-carved
Build Plate
Laser-carved
Build Plate

10-Inch 12K Mono LCD
10-Inch 12K Mono LCD

Fresnel Collimating
Light Source
Fresnel Collimating
Light Source

Voxeldance Tango Software
Voxeldance Tango Software

Plug-in Air Purifier
Plug-in Air Purifier

Generous Build Volume
Generous Build Volume

Laser-carved
Build Plate
Laser-carved
Build Plate
12K Printing Accuracy
ELEGOO Saturn 3 adopts a 10-inch 12K mono LCD with a resolution of 11520x5120 and an XY resolution of 19x24 microns, which allows for the production of intricate models with excellent details and exceptional sharpness. The replaceable 9H tempered glass effectively prevents scratches and damage to the LCD screen and prolongs its lifespan.

COB + Fresnel Collimating Lens
The COB light source paired with Fresnel collimating lens ensures a more perpendicular and uniform exposure across the screen, within a 5-degree light angle & 0.5% light-scattering coefficient, and 90% light uniformity, allowing you to print truly impressive models with smooth surfaces and sharp edges.

Upgraded Heat Dissipation System
The upgraded heat dissipation system includes 6 double heat-conducting copper tubes and 4 cooling fans on both sides of the light source for faster ventilation and better heat dissipation. This ensures that your printer is working at its best, prolonging its lifespan.


The dual linear guide rail design ensures that the Z-axis movement is quieter, more stable, and precise, reducing riffles on final prints.
The laser-carved build plate with excellent adhesion ensures that your prints stick to the build plate even when printing large models.
The non-slip hexagon socket leveling screws are designed for easy handling, making leveling fast and easy.
The printer's mid-plate is designed with a raised step to prevent resin from flowing inside the printer, keeping your machine components safe and clean.

The Voxeldance Tango software is designed to improve your printing efficiency, offering static mode and dynamic printing mode (dynamic mode including smooth mode and high-speed mode). With the open-source GOO slice file format, you can use third-party slicing software, such as CHITUBOX and Lychee Slicer, for added flexibility and convenience.

Your printing safety is our concern, which is why we've included an upgraded USB-powered air purifier, with a plastic protective case to effectively protect the built-in activated carbon filter from damage and breakage during transportation. For extra peace of mind, you can also opt for the upcoming ELEGOO Mars MATE air purifier, which can remove up to 95% of VOCs for a safe and comfortable workspace.
What's In Box

Saturn 3

USB AIR PURIFIER
Buy Accessory
Build Plate
Buy Accessory
Resin Tank
Buy Accessory
FUNNEL
Buy Accessory
U DISK

MASK

GLOVES

SCRAPER

BACKUP SCREWS

ADAPTER

USER MANUAL

TOOL KIT
Specification
LCD
10-inch 12K Mono LCD
System
EL3D-3.0.1
Slicer Software
Chitubox & Voxeldance Tango & Autodesk Fusion
Technology
MSLA Stereolithography
Layer Thickness
0.01-0.2mm
Printing Speed
MAX 70mm/h
Z Axis Accuracy
0.02mm
XY Resolution
19x24μm(11520x5120)
Build Volume
218.88mm(L)*122.88mm(W)*250mm(H)
Light Source
COB (wavelength 405nm)
Languages
Chinese, English
Connectivity
USB Interface
NET WEIGHT
11 kg
GROSS Weight
15.2kg
Operation
3.5-inch Touch Screen
Power Requirements
100-240V 50/60Hz 24V 4A
Printer Dimensions
305.9mm(L)*273mm(W)*567.3mm(H)
























FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 business days for delivery
2. Pre-owned Product: 4-8 business days for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 business days for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
Click to view Shipping Fees
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.